100S Salt Aerosol Automated Filter Tester

The 100S is the industry standard in salt aerosol filter testing. With a heavy focus on the end-user, the 100S can be utilized to meet various flat sheet media, filter, and respirator/mask testing requirements while offering unmatched customer features and benefits. A high level of performance coupled with low service and maintenance requirements makes the 100S ideally suited to meet the rigorous quality control and validation requirements of both  development and production quality control environments.

Applications
  • Filter Manufacturer
  • Flat Sheet Media Production
  • Automated Production Environments

An Industry Standard

The 100S is the industry standard in salt aerosol filter testing. With a heavy focus on the end-user, the 100S can be utilized to meet various flat sheet media, filter, and respirator/mask testing requirements while offering unmatched customer features and benefits. A high level of performance coupled with low service and maintenance requirements makes the 100S ideally suited to meet the rigorous quality control and validation requirements of both development and production quality control environments. The 100S is undeniably the most user friendly and cost effective solution available today.

A color touch screen interface offers intuitive interaction with the instrument and visual status of system parameters. time to maintain the aerosol solution on a daily basis. Furthermore, “Set & Forget” load testing allows the user to leave the instrument unattended due to automated, real-time flow adjustment coupled with logic that stops a load test at the prescribed moment as set by the customer. Salt aerosol  testing has never been so user friendly.

For the first time, the customer has a choice in operational configuration of a salt based aerosol automated filter tester. The 100S can be supplied
in a manual, automatic, or hybrid mode of operation.

 

100s1

The manual version is ideal for lab use or production lot testing and requires an operator to engage a test using ergonomic photo-electric actuators. Included standard is a manual test fixture and standard 100cm2 flat sheet media fixture.

The automatic version integrates seamlessly with a customer designed, PLC driven, automated production line and is ideal for 100% in-line non-destructive product testing.  The unit becomes a slave device to the automated production  line and is controlled via communication port. In fact, the 100S is the only salt aerosol filter tester capable of seamless automated production integration.

The Hybrid version  provides both the ability to operate in an automated production environment as well as in a manual mode.

Options and Accessories

The 100S can be supplied with an optional local exhaust module to filter all aerosol exhaust when facility exhaust ducting is not available. Other
available accessories are a base / storage cabinet, N95 mask adapter, and gravimetric filter holder.

100s                                                                                                                      100s2

Product Specifications
Size 71cm W x 69cm D x 89cm H (28” W x 27” D x 34” H)
Weight 75Kg (165bs)
Aerosol Size & Distribution 0.075μm Count Median Diameter / 0.26μm Mass Mean Diameter / Geometric Standard Deviation < 1.86
Concentration 35 to 50 milligrams per cubic meter (mg/m3)
Efficiency up to 99.9995%
Pressure 0 - 200 millimeters of water column (0 - 7.88 inches of w.c.) / accuracy ± 2.5% of full scale
Flow Rate 10 to 100 liters per minute (slpm or alpm) / accuracy ± (0.4% of reading + 0.2% full scale)
Electrical 110VAC, 60 Hz, 5.5A or 220VAC, 50Hz, 2.5A
Compressed Air 566 SLPM @ 5.6 kg/cm2 (20 SCFM @ 80 PSIG)